Apollo™ NC and SC Coronary Balloon Dilatation Catheters – High-Performance Solutions for PTCA Procedures

​The BrosMed Apollo™ NC PTCA Balloon Dilatation Catheter is a non-compliant, high-pressure balloon catheter designed for percutaneous transluminal coronary angioplasty (PTCA) procedures. Its robust construction ensures minimal compliance and axial growth, providing precise and reliable performance during post-dilatation interventions.​Key Features:

• Balloon Diameters: 2.0 mm to 5.0 mm
• Balloon Lengths: 6 mm to 30 mm​
• Nominal Pressure: 12 atm​Rated Burst Pressure (RBP): 22 atm (for diameters 2.0–4.0 mm), 20 atm (for diameters 4.5–5.0 mm)​
• Average Burst Pressure: 30 atm
• Compliance: Non-compliant, with a compliance rate of 0.55%​​
• Balloon Pleats: 3
• Tip Length: 2.0 mm / 2.5 
• Distal Shaft Outer Diameter: 2.55F / 2.6F​
• Proximal Shaft Outer Diameter: 2.0F​
• Guiding Catheter Compatibility: 5F compatible; 6F compatible for kissing balloon techniques​
• Working Length: 140 cm​
• Coating: Slider™ hydrophilic coating from the tip to the adjacent guidewire port (external surface); Eel™ coating for the guidewire lumen​

Ordering Information:

The Apollo™ NC PTCA Balloon Catheter is available in various configurations to accommodate specific procedural requirements. Below is a selection of available sizes:​